Home
Go Back   East Coast Fishing Reports and Pictures Forum > Do it Yourself Talk > Fishing Tackle and Gear

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-20-2007, 05:19 PM
Member
 
Join Date: Jan 2007
Location: SURF,OCEAN,BAYS
Posts: 19

Default PENN_REEL_HELP

I've been gathering information on the Penn conventionals for a few months. My goal when I started this was to figure out what parts are interchangeable with what reels - in particular, are there gear sets to speed up a squidder. Also which Newell parts can be used on which reels

I still have a long way to go but here's the info (minus pictures) so far.
If you can add anything to it please do.

Penn Standard Conventionals:

25, 25M Monofil –

26, 26M Monofil 340 of 12#

27, 27M Monofil

60 Longbeach, Smallest of the longbeach series, 500 yds. of 15lb., 2.5 to 1 ratio

65 Longbeach,

66 Super Longbeach,

67 Super Longbeach - 300 yards of 40# test mono

68 SuperLongbeach - 500yds of 40 lb., 2.5 : 1 ratio (trolling reel)

77 Sea-Hawk, very low end bakalite reel

78 Sea-Scamp – lowest end bakalite

79 Sea-Mate

80 Conv.

85 Sea Boy – low end reel

99 Silver Beach - 3 to 1 ratio

100, 100M Surfmaster, 150, 150M Surfmaster, 200M Surfmaster, 250 Surfmaster

130 Sailfisher

140L Squidder, 140L-LH Squidder (left), 145 Squidder, 146L Squidder

149, 149M, 149L Mariner

155, 155M, 155L Beachmaster,

160 – ratio 2.8:1, 150 Yards 30 Lb Dacron160M

160L Beachmaster,

165 Beachmaster

180 Baymaster (Spool is 1 9/16" WIDE),
250 yds. of 18 lb, 2.8 to 1 ratio

185 Baymaster (up to 1970),
185 Seaboy (1990+),
190 Seaboy

249 Mariner, 349 Master Mariner, 349H Master Mariner, 349HC Master Mariner

259 Live Bait Caster

267 Long Beach,
268 Long Beach, 285,
285M Delmar – bacalite sides

500 Jigmaster 4-1 gear ratio, 275 yards of 30 lb
500S Jigmaster,
501 Jigmaster Narrow Spool,
505HS Jigmaster High Speed - 5-1 gear ratio, 275 yards of 30 lb
506HS Jigmaster High Speed

970 Mag Power

980 Mag Power

990 Mag Power

Penn Levelines
9 Peerless

9M Monofil

9MS Peerless Monofil – 400 of 12#

10 Mag Tuned – BB's, 4 to 1 ratio, 275 of 15# mono.

109 Peer levelwind, Capacity 275 - 15LB mono, Ratio 3.75 / 1

109LH – left hand retrieve

109M, Peer, Monofil

209 Peer,

209M, Peer, Monofil Sr. Level Wind reel. Gear ratio 3-1 line cap. 320yds.of 20lb

209MF – 250 of 36# Nylon - 300 mono (from side of box)

210M Mag Tuned

210 MS, Levelwind, Ball Bearings, Gear Ratio 4:1, 350 YDS./20LB

309, Levelwind, Gear Ratio 3.0/1 . Capacity 30 LB – 350 to 375 YDS

309M Super Peer
310GTi Super Levelwind Graphite
320GTi Super Levelwind Graphite
320GT2 Super Levelwind Graphite Next Gen.
321GTi-LH Super Levelwind Graphite
320LD Super Levelwind Graphite Leverdrag
330GTi Super Levelwind Graphite
330LD Super Levelwind Graphite Leverdrag
340GTi Super Levelwind Graphite 4/0
345GTi Super Levelwind Graphite 5/0

350M Leveline


Matching size drag washers –

10.60,65,85,99,100,110,140,145,146,149,150,200,285 ,910,920,930,940, 860,870, and 880

9,109, 149,155,25,160,180,26,27,209, AND 350

210, 309, 500SL,501, 505, 506, 500, AND 112H

113H,113HSP,113HL,113HLW,340GTI,AND 345GTI

Matching Spools

100,180,185,190 and possibly more

79,80,85,285 and possibly more

60,111-285 (and possibly more

49-149 (and possibly more

Matching side rings

155,160 and 180 and possibly more

66,67 and 68 (and possibly more

2/0 111 Senator, 60 Longbeach, 85 & 285

Matching Base Plate

Penn 30-66 reel stand will fit the Penn reels 66,112H,150, 209 and 309

Newell graphite RB2/15 (Plastic)stand kit with clamp & Stainless Steel clamp mounting screws fits the Penn 112H 3/0 High Speed Senator, 145 midsized Squidder, 150 Surfmaster , 160 Beachmaster, Albacore Special ( a converted Penn Jigmaster with a S99 spool this stand & Newell SP1 posts) or any Penn reel using the 29-65 or 29-66 stand & fits the Newell 229 Or 332 with the short screwed frame ,a set of 4 Newell short frame screws. The Penn stand screws will be too short

Newell Graphite ( Plastic) SP4 Suport spacer bars. Parts have " Newell on them in bold white letters , note change in style of the letters they are slanted now. One post has a metal strip so the line will not cut into it. These fit the 220 or 322 Newell reels using short screws or , The following Penn reels 501,506,349,149,49, & the 110 1/0 Senator using longer screws.

THESE REELS NOT YET IN THE SYSTEM
#6 International
14 Atlantic
125 Seagate


Baitcasters
See International Section for Int. Baitcasters
920 Levelmatic Narrow Spool w/CB-handle 20LB = 120 YDS, 4 to 1 ratio

930 Levelmatic w/CB-handle
940 Levelmatic w/P-handle
1000 Baitcaster
2000 Baitcaster
Senators
110 1/0 Senator Light Tackle Trolling
111 2/0 Senator Light Tackle Trolling
112 (3/0) Senator Light Tackle Trolling
112H (3/0) Special Senator Light Tackle Trolling
113 (4/0) Senator Light Tackle Trolling
113H (4/0) Special Senator Light Tackle Trolling
113HN (4/0) Senator Baja Special
113HL (4/0) Special Senator Light Tackle Trolling
113HLW (4/0) Special Senator Light Tackle Trolling
113HSP (4/0) Special Senator Wire Lining
114 (6/0) Senator Light Tackle Trolling
114H (6/0) Special Senator Light Tackle Trolling
114HL (6/0) Special Senator Light Tackle Trolling
114HLW (6/0) Special Senator Light Tackle Trolling
115L (9/0) Senator Medium Tackle Trolling
116A (10/0) Senator Heavy Tackle Trolling
116L (12/0) Senator Heavy Tackle Trolling
117L (14/0) Senator Ex. Heavy Tackle Trolling
118 (16/0) Senator Ex. Heavy Tackle Trolling
Offshore Leverdrag Models
GLD 20
GLD 20ii
GLD 30
GLD 30ii
GLD 50ii
10KG Formula Graphite Leverdrag 2-Speed
10LD Formula Graphite Leverdrag
15KG Formula Graphite Leverdrag 2-Speed
15LD Formula Graphite Leverdrag
24KG Formula Graphite Leverdrag 2-Speed
225LD Graphite Leverdrag
245LD Graphite Leverdrag
246LD Graphite Leverdrag
Misc Offshore/Trolling
25GLS GLS series Graphite
40GLS GLS series Graphite
45GLS GLS series Graphite
49L Super Mariner
525GS Graphite Series
525MAG Graphite Series
525MAG-T Graphite Series
535GS Graphite Series
535MAG Graphite Series
545GS Graphite Series
545MAG Graphite Series
555GS Graphite Series
555MAG Graphite Series
855LC Linecounter
875LC Linecounter
895LC Linecounter

PENN COMMANDER 30LW ratio 4.2 : 1, 330 yards 30lb
Reply With Quote
  #2 (permalink)  
Old 02-21-2007, 08:49 AM
fish-aholic's Avatar
Fresh Water Fishing Moderator
 
Join Date: Mar 2006
Location: Centreville, VA
Posts: 1,628

Default

found this thread on another site...it may help you out alot

http://www.stripers247.com/phpBB2/sh...n+reel+project
__________________
Jeff

www.fish-aholic.com

Self Pronounced Problem Fisherman
Reply With Quote
  #3 (permalink)  
Old 02-21-2007, 12:41 PM
Bohica's Avatar
1,000 Posts Club
 
Join Date: Apr 2006
Location: West Ocean City, Md
Posts: 1,114

Default

Man, somebody's got cabin fever.....come on SPRING!!!
__________________
Ъøhïcâ - So long, and thanks for all the fish!
Reply With Quote
  #4 (permalink)  
Old 03-16-2007, 01:51 PM
Member
 
Join Date: Feb 2007
Location: DE Bay
Posts: 25

Default

Do you actually have the Int 6? If so, interested in selling it?
Reply With Quote
  #5 (permalink)  
Old 03-20-2007, 01:27 PM
Member
 
Join Date: Jan 2007
Location: SURF,OCEAN,BAYS
Posts: 19

Default Penn #6 International

No,,,I don't have one...But if you are interested in Bidding on one, there is one on E-Bay #320094218731..and #190094335808
GOOOOOOOD LUCK

Last edited by Captbob71; 03-20-2007 at 01:33 PM. Reason: up-date
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

 
GeoURL

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0 ©2008, Crawlability, Inc. Sam Kilgore & AtlanticAnglers.com