PENN_REEL_HELP
I've been gathering information on the Penn conventionals for a few months. My goal when I started this was to figure out what parts are interchangeable with what reels - in particular, are there gear sets to speed up a squidder. Also which Newell parts can be used on which reels
I still have a long way to go but here's the info (minus pictures) so far.
If you can add anything to it please do.
Penn Standard Conventionals:
25, 25M Monofil –
26, 26M Monofil 340 of 12#
27, 27M Monofil
60 Longbeach, Smallest of the longbeach series, 500 yds. of 15lb., 2.5 to 1 ratio
65 Longbeach,
66 Super Longbeach,
67 Super Longbeach - 300 yards of 40# test mono
68 SuperLongbeach - 500yds of 40 lb., 2.5 : 1 ratio (trolling reel)
77 Sea-Hawk, very low end bakalite reel
78 Sea-Scamp – lowest end bakalite
79 Sea-Mate
80 Conv.
85 Sea Boy – low end reel
99 Silver Beach - 3 to 1 ratio
100, 100M Surfmaster, 150, 150M Surfmaster, 200M Surfmaster, 250 Surfmaster
130 Sailfisher
140L Squidder, 140L-LH Squidder (left), 145 Squidder, 146L Squidder
149, 149M, 149L Mariner
155, 155M, 155L Beachmaster,
160 – ratio 2.8:1, 150 Yards 30 Lb Dacron160M
160L Beachmaster,
165 Beachmaster
180 Baymaster (Spool is 1 9/16" WIDE),
250 yds. of 18 lb, 2.8 to 1 ratio
185 Baymaster (up to 1970),
185 Seaboy (1990+),
190 Seaboy
249 Mariner, 349 Master Mariner, 349H Master Mariner, 349HC Master Mariner
259 Live Bait Caster
267 Long Beach,
268 Long Beach, 285,
285M Delmar – bacalite sides
500 Jigmaster 4-1 gear ratio, 275 yards of 30 lb
500S Jigmaster,
501 Jigmaster Narrow Spool,
505HS Jigmaster High Speed - 5-1 gear ratio, 275 yards of 30 lb
506HS Jigmaster High Speed
970 Mag Power
980 Mag Power
990 Mag Power
Penn Levelines
9 Peerless
9M Monofil
9MS Peerless Monofil – 400 of 12#
10 Mag Tuned – BB's, 4 to 1 ratio, 275 of 15# mono.
109 Peer levelwind, Capacity 275 - 15LB mono, Ratio 3.75 / 1
109LH – left hand retrieve
109M, Peer, Monofil
209 Peer,
209M, Peer, Monofil Sr. Level Wind reel. Gear ratio 3-1 line cap. 320yds.of 20lb
209MF – 250 of 36# Nylon - 300 mono (from side of box)
210M Mag Tuned
210 MS, Levelwind, Ball Bearings, Gear Ratio 4:1, 350 YDS./20LB
309, Levelwind, Gear Ratio 3.0/1 . Capacity 30 LB – 350 to 375 YDS
309M Super Peer
310GTi Super Levelwind Graphite
320GTi Super Levelwind Graphite
320GT2 Super Levelwind Graphite Next Gen.
321GTi-LH Super Levelwind Graphite
320LD Super Levelwind Graphite Leverdrag
330GTi Super Levelwind Graphite
330LD Super Levelwind Graphite Leverdrag
340GTi Super Levelwind Graphite 4/0
345GTi Super Levelwind Graphite 5/0
350M Leveline
Matching size drag washers –
10.60,65,85,99,100,110,140,145,146,149,150,200,285 ,910,920,930,940, 860,870, and 880
9,109, 149,155,25,160,180,26,27,209, AND 350
210, 309, 500SL,501, 505, 506, 500, AND 112H
113H,113HSP,113HL,113HLW,340GTI,AND 345GTI
Matching Spools
100,180,185,190 and possibly more
79,80,85,285 and possibly more
60,111-285 (and possibly more
49-149 (and possibly more
Matching side rings
155,160 and 180 and possibly more
66,67 and 68 (and possibly more
2/0 111 Senator, 60 Longbeach, 85 & 285
Matching Base Plate
Penn 30-66 reel stand will fit the Penn reels 66,112H,150, 209 and 309
Newell graphite RB2/15 (Plastic)stand kit with clamp & Stainless Steel clamp mounting screws fits the Penn 112H 3/0 High Speed Senator, 145 midsized Squidder, 150 Surfmaster , 160 Beachmaster, Albacore Special ( a converted Penn Jigmaster with a S99 spool this stand & Newell SP1 posts) or any Penn reel using the 29-65 or 29-66 stand & fits the Newell 229 Or 332 with the short screwed frame ,a set of 4 Newell short frame screws. The Penn stand screws will be too short
Newell Graphite ( Plastic) SP4 Suport spacer bars. Parts have " Newell on them in bold white letters , note change in style of the letters they are slanted now. One post has a metal strip so the line will not cut into it. These fit the 220 or 322 Newell reels using short screws or , The following Penn reels 501,506,349,149,49, & the 110 1/0 Senator using longer screws.
THESE REELS NOT YET IN THE SYSTEM
#6 International
14 Atlantic
125 Seagate
Baitcasters
See International Section for Int. Baitcasters
920 Levelmatic Narrow Spool w/CB-handle 20LB = 120 YDS, 4 to 1 ratio
930 Levelmatic w/CB-handle
940 Levelmatic w/P-handle
1000 Baitcaster
2000 Baitcaster
Senators
110 1/0 Senator Light Tackle Trolling
111 2/0 Senator Light Tackle Trolling
112 (3/0) Senator Light Tackle Trolling
112H (3/0) Special Senator Light Tackle Trolling
113 (4/0) Senator Light Tackle Trolling
113H (4/0) Special Senator Light Tackle Trolling
113HN (4/0) Senator Baja Special
113HL (4/0) Special Senator Light Tackle Trolling
113HLW (4/0) Special Senator Light Tackle Trolling
113HSP (4/0) Special Senator Wire Lining
114 (6/0) Senator Light Tackle Trolling
114H (6/0) Special Senator Light Tackle Trolling
114HL (6/0) Special Senator Light Tackle Trolling
114HLW (6/0) Special Senator Light Tackle Trolling
115L (9/0) Senator Medium Tackle Trolling
116A (10/0) Senator Heavy Tackle Trolling
116L (12/0) Senator Heavy Tackle Trolling
117L (14/0) Senator Ex. Heavy Tackle Trolling
118 (16/0) Senator Ex. Heavy Tackle Trolling
Offshore Leverdrag Models
GLD 20
GLD 20ii
GLD 30
GLD 30ii
GLD 50ii
10KG Formula Graphite Leverdrag 2-Speed
10LD Formula Graphite Leverdrag
15KG Formula Graphite Leverdrag 2-Speed
15LD Formula Graphite Leverdrag
24KG Formula Graphite Leverdrag 2-Speed
225LD Graphite Leverdrag
245LD Graphite Leverdrag
246LD Graphite Leverdrag
Misc Offshore/Trolling
25GLS GLS series Graphite
40GLS GLS series Graphite
45GLS GLS series Graphite
49L Super Mariner
525GS Graphite Series
525MAG Graphite Series
525MAG-T Graphite Series
535GS Graphite Series
535MAG Graphite Series
545GS Graphite Series
545MAG Graphite Series
555GS Graphite Series
555MAG Graphite Series
855LC Linecounter
875LC Linecounter
895LC Linecounter
PENN COMMANDER 30LW ratio 4.2 : 1, 330 yards 30lb
|